Jump to main content

The MX410 surface mount version is a gooseneck microphone with a Bi-Color LED as status display. It has a 25,4 cm gosseneck and is suitable for boardrooms and other sites where aesthetics are important.

Main Features

  • Gooseneck length: 10 inch / 25.4 cm
  • Low profile, aesthetic design
  • Wide dynamic range and smooth frequency response
  • RF filtering with CommShield™ technology
  • Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
  • Capsule options: None, Cardioid, Supercardioid
  • Preamplifier Options
    • MX400DP Desktop Base for MX405 and MX410 models
    • MX890  Wireless Desktop Base for MX405 and MX410 models
    • MX400SMP Surface Mount Preamp for MX405 and MX410 models
    • MXW8 Wireless Desktop Base for MX405, MX410 and MX415 models
    • ULXD8  Wireless Desktop Base for MX405, MX410 and MX415 models

Furnished Accessories

Amount Part Title
1 Snap-fit Foam Windscreen Part RK513WS

Available Variants

The polar pattern of the cartridges are indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge

  • MX410LP/C, MX410LP/N, MX410LP/S: 10 inch (254 mm), bi-color LED at gooseneck bottom, less preamp, Black
  • MX410WLP/N: 10 inch (254 mm), bi-color LED at gooseneck bottom, less preamp, White
  • MX410RLP/C, MX410RLP/N, MX410RLP/S: 10 inch (254 mm), red light ring on gooseneck top, less preamp, Black
  • MX410WRLP/N: 10 inch (254 mm), red light ring on gooseneck top, less preamp, White
  • MX410LPDF/C, MX410LPDF/S: 25.4 cm Dualflex Gooseneck Microphone with Bi-color LED at the bottom, less preamp, Black
  • MX410WLPDF/N: 25.4 cm Dualflex Gooseneck Microphone with Bi-color LED at the bottom, less preamp, White
  • MX410RLPDF/C, MX410RLPDF/S, MX410RLPDF/N:  25.4 cm Dualflex Gooseneck Microphone with red light ring on top, less preamp, Black
  • MX410WRLPDF/N:  25.4 cm Dualflex Gooseneck Microphone with red light ring on top, less preamp, White

Specs

Technical specifications

Weight:
68 g
Height x Width x Depth:
251.0 × 7.5 × 7.5 mm
Frequency Response:
50 Hz – 17 kHz
Frequency Response:
Tailored
Sensitivity:
Cardioid: -35.00, Supercardioid: -34.00, Lobar Mini-shotgun: -33.00 dBV/Pa – Cardioid: 18.00, Supercardioid: 21.00, Lobar Mini-shotgun: 22.00 mV/Pa
Equivalent Selfnoise:
Cardioid: 28 dB(A), Supercardioid 27 dB(A)
Sound Pressure:
Cardioid: 121 dB, Supercardioid: 120 dB
Transducer Type:
Condenser
Polar Pattern:
Cardioid, Subcardioid
Switchable low cut:
Yes
Connectors:
6-pin modular connector
Attenuator:
Yes
Interchangeable Capsule:
Yes
Main Functionality:
Installed
Headphone Output:
No
Requires Phantom Power:
48-52 VDC VDC
Cartridge:
Interchangeable

Further Technical Specifications

Further Specs:
  • Output Impedance: EIA Rated at 150 Ω (170 Ω actual)
  • Sensitivity (at 1 kHz , open circuit voltage):
    • Cardioid-35dBV/Pa / 18mV/Pa;
    • Supercardioid-34dBV/Pa / 21mV/Pa
  • Maximum SPL (1 kHz at 1% THD, 1 kΩ load)
    • Cardioid: 121 dB
    • Supercardioid: 120 dB
  • Equivalent Output Noise (A-weighted)
    • Cardioid: 28 dB SPL
    • Supercardioid: 27 dB SPL
  • Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
    • Cardioid: 66 dB
    • Supercardioid: 68 dB
  • Dynamic Range (1 kΩ load at 1 kHz): 93 dB
  • Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
  • Preamplifier Output Clipping Level (1% THD): –8 dBV (0.4 V)
  • Polarity
    • 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
    • 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector. 
  • Logic Connections
    • LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
    • LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
  • Mute Switch Attenuation: –50 dB minimum
  • Environmental Conditions
    • Operating Temperature: -18–57 °C (0–135 °F)
    • Storage Temperature: -29–74 °C (-20–165 °F)
    • Relative Humidity: 0–95%
  • Power Requirements: 48–52 Vdc phantom, 8.0 mA

Downloads

Comparable products

Optional accessories

You might also be interested in...