The MX415 surface mount version is a gooseneck microphone with a Bi-Color LED or light ring status display. It has a 38.1 cm gosseneck and is suitable for boardrooms and other sites where aesthetics are important.
Main Features
Main Features
- Gooseneck length: 15 inch / 38.1 cm
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- RF filtering with CommShield™ technology
- Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
- Capsule options: None, Cardioid, Supercardioid
- Preamplifier Options
- MX400DP Desktop Base for MX405, MX410 and MX415 models
- MX890 Wireless Desktop Base for MX405, MX410 and MX415 models
- MX400SMP Surface Mount Preamp for MX405, MX410 and MX415 models
- MXW8: Wireless Desktop Base for MX405, MX410 and MX415 models
- ULXD8: Wireless Desktop Base for MX405, MX410 and MX415 models
Furnished Accessories
Furnished Accessories
| Amount | Part Title |
|---|---|
| 1 | Snap-fit Foam Windscreen Part RK513WS |
| 1 | Surface Mount Preamp Part MX400SMP |
| 1 | Fastening Wing Nut Part 65A2190 |
| 2 | Rubber Isolation Rings Part 66A405 |
| 1 | 5-Pin XLR Female Connector Part 95A2529 |
Available Variants
Available Variants
The polar pattern of the cartridges are indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
- MX415LP/C, MX415LP/N, MX415LP/S: 15 inch (381 mm), bi-color LED at gooseneck bottom, less preamp
- MX415RLP/C, MX415RLP/N, MX415RLP/S: 15 inch (381 mm), red light ring on gooseneck top, less preamp
- MX415LPDF/C, MX415LPDF/S: 38.1 cm Dualflex Gooseneck Microphone with Bi-color LED at the bottom
- MX415RLPDF/C, MX415RLPDF/S, MX415RLPDF/N: 38.1 cm Dualflex Gooseneck Microphone with red light ring on top
Specs
Specs
Technical specifications
Weight:
70
g
Height x Width x Depth:
376.0 × 7.5 × 7.5
mm
Frequency Response:
50 Hz – 17 kHz
Frequency Response:
Tailored
Sensitivity:
Cardioid: -35.00, Supercardioid: -34.00 dBV/Pa – Cardioid: 18.00, Supercardioid: 21.00 mV/Pa
Equivalent Selfnoise:
Cardioid: 28 dB(A), Supercardioid 27 dB(A)
Sound Pressure:
Cardioid: 121 dB , Supercardioid: 120 dB
Transducer Type:
Condenser
Polar Pattern:
Cardioid
Switchable low cut:
Yes
Connectors:
5 Pin XLR
Attenuator:
Yes
Interchangeable Capsule:
Yes
Main Functionality:
Installed
Headphone Output:
No
Requires Phantom Power:
48-52 VDC
VDC
Cartridge:
Interchangeable
Further Technical Specifications
Further Specs:
- Output Impedance: EIA Rated at 150 Ω (170 Ω actual)
- Sensitivity (at 1 kHz , open circuit voltage):
- Cardioid-35dBV/Pa / 18mV/Pa;
- Supercardioid-34dBV/Pa / 21mV/Pa
- Maximum SPL (1 kHz at 1% THD, 1 kΩ load)
- Cardioid: 121 dB
- Supercardioid: 120 dB
- Equivalent Output Noise (A-weighted)
- Cardioid: 28 dB SPL
- Supercardioid: 27 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
- Cardioid: 66 dB
- Supercardioid: 68 dB
- Dynamic Range (1 kΩ load at 1 kHz): 93 dB
- Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
- Preamplifier Output Clipping Level (1% THD): –8 dBV (0.4 V)
- Polarity
- 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
- 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
- Logic Connections
- LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
- LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
- Mute Switch Attenuation: –50 dB minimum
- Environmental Conditions
- Operating Temperature: -18–57 °C (0–135 °F)
- Storage Temperature: -29–74 °C (-20–165 °F)
- Relative Humidity: 0–95%
- Power Requirements: 48–52 Vdc phantom, 8.0 mA